Loading ...
Loading ...
Loading ...
24-Port Gigabit (Hi-Power) PoE+ Ethernet Smart Managed Pro Switch with 2 SFP Ports
Configure Quality of Service User Manual235
The Policy Configuration page displays.
7. Select the check box next to the policy name.
8. Do one of the following:
• To change the class, select another class rom the Member Class menu.
• To remove the class, select None, from the Member Class menu.
9. Click the Apply
button.
Your settings are saved.
Delete a DiffServ policy
To delete a DiffServ policy:
1. Connect your
computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ether
net cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Access the switch on-network and
connected to the Internet on page 18 or Access the switch off-network on page 27.
The Local Device Login page displays.
If you did not yet register the switch with your NETGEAR account, the
Register to unlock
all features page displays. For more information, see
Register the switch on page 31.
4. Enter one of the following passwords:
• After initial login, enter your local device password.
By default, the local device password is
password.
Y
ou must change this password
at initial login.
• If you previously managed the switch through the Insight app or Cloud portal, enter
the Insight network password for the last Insight network location.
For information about the credentials, see
Credentials for the local browser UI on
page 30.
5. Click the Login
button.
The System Information page displays.
6. Select QoS >
DiffServ > Advanced > Policy Configuration.
The Policy Configuration page displays.
7. Select the check box next to the policy name.
8. Click the Delete
button.
The policy is removed.
Loading ...
Loading ...
Loading ...