Loading ...
Loading ...
Loading ...
24-Port Gigabit (Hi-Power) PoE+ Ethernet Smart Managed Pro Switch with 2 SFP Ports
Maintain or Troubleshoot the Switch User Manual399
The System Information page displays.
6. Select Maintenance > File
Management > Dual Image Configuration.
7. As an option, specify a name for the selected image by entering one in the Image
Description field.
8. Select the Activate Image check
box.
9. Click the Apply
button.
Your settings are saved.
10. After activating the image, reboot the switch (see
Reboot the switch on page 383).
If you do not reboot the switch, it continues running the image shown in the
Current-active field until the next time that the switch reboots.
Delete a software image
To delete a software image:
1. Connect your computer
to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch
a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Access the switch on-network and
connected to the Internet on page 18 or Access the switch off-network on page 27.
The Local Device Login page displays.
If you did not yet register the switch with your NETGEAR account, the Register
to unlock
all features page displays. For more information, see
Register the switch on page 31.
4. Enter one of the following passwords:
• After initial login, enter your local device password.
By default, the local device password is password
.
You must change this password
at initial login.
• If you previously managed the switch through the Insight app or
Cloud portal, enter
the Insight network password for the last Insight network location.
Loading ...
Loading ...
Loading ...