Loading ...
Loading ...
Loading ...
24-Port Gigabit (Hi-Power) PoE+ Ethernet Smart Managed Pro Switch with 2 SFP Ports
Configure Switching User Manual174
5. Click the Login button.
The System Information page displays.
6. Select Switching > STP
> Advanced > MST Port Configuration.
Note: If no MST instances are configured on the switch, the page displays a
“No MSTs Available” message.
7. From the Select MST
menu, select the MST instance.
You can select only instances that you added to the switch (see
Configure an MST
instance on page 170).
8. Select whether to display physical interfaces, LAGs, or both by clicking one of the following
links above
the table heading:
•1 (the
unit ID of the switch). Only physical interfaces are displayed. This is the default
setting.
• LAG
. Only LAGs are displayed.
• All. Both physical interfaces and LAGs are displayed.
9. Select
one or more interfaces by taking one of the following actions:
• To configure a single interface, select the check box associated with the port, or type
the port number in the Go T
o Interface field and click the Go button.
• To configure multiple interfaces with the same settings, select the check box
associated with each interface.
• To configure all interfaces with the same settings, select the check box in the heading
row
.
10. Configure the MST
values for the selected interfaces:
• Port Priority. The priority for a particular port within the selected MST instance.
The
port priority is set in multiples of 16. If you specify a value that is not a multiple of 16,
the priority is set to the priority is automatically set to the next lowest priority that is a
multiple of 16. For example, if you set a value between 0 and 15, the priority is set to
0. If you specify a number between 16 and 31, the priority is set to 16. Specify a value
in the range of 0–240.
• Port Path Cost.
Set the
path cost to a new value for the specified port in the selected
MST instance. Specify a value in the range of 0–200000000.
Loading ...
Loading ...
Loading ...