Loading ...
Loading ...
Loading ...
24-Port Gigabit (Hi-Power) PoE+ Ethernet Smart Managed Pro Switch with 2 SFP Ports
Configure System Information User Manual59
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Access the switch on-network and
connected to the Internet on page 18 or Access the switch off-network on page 27.
The Local Device Login page displays.
If you did not yet register the switch with your NETGEAR account, the
Register to unlock
all features page displays. For more information, see
Register the switch on page 31.
4. Enter one of the following passwords:
• After registration, enter the local device password.
By default, the local device password is
password.
Y
ou must change this password
at initial login.
• If you previously managed the switch through the Insight app or Cloud portal, enter
the Insight network password for the last Insight network location.
For information about the credentials, see
Credentials for the local browser UI on
page 30.
5. Click the Login
button.
The System Information page displays.
6. Select System >
Management > IPv6 Network Configuration.
The IPv6 Network Global Configuration page displays.
7. Next to Admin Mode, ensure that the Enable
radio button is selected.
8. Determine how
the switch acquires an IPv6 address:
• IPv6 Address Auto Configuration Mode. Select the Enable radio button to enable
the network interface to acquire an IPv6 address through IPv6 Neighbor Discovery
Protocol (NDP) and through the use of router advertisement messages. If you select
the Disable radio button (which is the default selection), the network interface does
not use the native IPv6 address auto-configuration features to acquire an IPv6
address.
Auto-configuration functions only if DHCPv6 is not ena
bled on the
management interface.
• DHCPv6. Next to Current Network Configuration Protocol, select the DHCPv6 radio
button to enable the DHCPv6 client on the management interface.
The switch
attempts to acquire network information from a DHCPv6 server
. If you select the
None radio button (which is the default selection), the DHCPv6 client on the network
interface is disabled. If DHCPv6 is enabled, the DHCPv6 Client DUID field displays
the client identifier used by the DHCPv6 client (if enabled) when sending messages to
the DHCPv6 server.
9. In
the IPv6
Gateway field, specify the default gateway for the IPv6 network interface.
The gateway address is in IPv6 global or link-local address format.
10. To configure one or more static IPv6 addresses for the local browser UI, do the following:
a. In the
IPv6 Address/Prefix Length
field, specify the static IPv6 prefix and prefix to
the IPv6 network interface.
Loading ...
Loading ...
Loading ...