Loading ...
Loading ...
Loading ...
24-Port Gigabit (Hi-Power) PoE+ Ethernet Smart Managed Pro Switch with 2 SFP Ports
Manage Device Security User Manual262
The options are as follows:
• Radius. The user
’s ID and password are authenticated using the RADIUS server
instead of locally.
• None. The user is not authenticated.
9. Click the Apply
button.
Your settings are saved.
Manage the Smart Control Center Utility
By default, the Smart Control Center (SCC) utility is disabled. You still can use the SCC utility
to discover the IP address of the switch, but you cannot use the utility to perform any actions
on the switch. If you enable the SCC utility, you can use it to configure the switch.
For more information about the SCC utility, see
Discover the switch in a network with a
DHCP server using the Smart Control Center on page 23 and Discover the switch in a
network without a DHCP server using the Smart Control Center on page 24.
Note: The switch administrator password is contained in each NETGEAR
Switch Discovery Protocol (NSDP) packet. Therefore, to increase the
switch security, the SCC utility is disabled by default.
To enable or disable the SCC administrative mode:
1. Connect
your
computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ether
net cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Access the switch on-network and
connected to the Internet on page 18 or Access the switch off-network on page 27.
The Local Device Login page displays.
If you did not yet register the switch
with your NETGEAR account, the Register to unlock
all features page displays. For more information, see
Register the switch on page 31.
4. Enter one of the following passwords:
• After initial login, enter your local device password.
By default, the local device password is
password.
Y
ou must change this password
at initial login.
• If you previously managed the switch through the Insight app or Cloud portal, enter
the Insight network password for the last Insight network location.
Loading ...
Loading ...
Loading ...