Loading ...
Loading ...
Loading ...
24-Port Gigabit (Hi-Power) PoE+ Ethernet Smart Managed Pro Switch with 2 SFP Ports
Maintain or Troubleshoot the Switch User Manual386
Reset the switch to factory default settings and reset the
registration status
You can use the local browser UI to reset the switch to the factory default settings and reset
the registration status.
However, if you can physically access the switch, you can press a button on the front panel to
reset the switch to factory default settings and reset the registration status:
• Model GS724TPv2. Press the dual-function Factory Defaults button for more than
10 seconds.
• Model GS724TPP. Press the multi-function Reset button for more than 10 seconds.
To use the local browser UI to reset the switch to factory default settings and reset the
registration status:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ether
net cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Access the switch on-network and
connected to the Internet on page 18 or Access the switch off-network on page 27.
The Local Device Login page displays.
If you did not yet register the switch
with your NETGEAR account, the Register to unlock
all features page displays. For more information, see
Register the switch on page 31.
4. Enter one of the following passwords:
• After initial login, enter your local device password.
By default, the local device password is
password.
Y
ou must change this password
at initial login.
• If you previously managed the switch through the Insight app or Cloud portal, enter
the Insight network password for the last Insight network location.
For information about the credentials, see
Credentials for the local browser UI on
page 30.
5. Click the Login
button.
The System Information page displays.
6. Select Maintenance >
Reset > Factory Default.
The Default Settings page displays.
7. Select the Reset
and erase everything including registered device status radio button.
Loading ...
Loading ...
Loading ...