Loading ...
Loading ...
Loading ...
24-Port Gigabit (Hi-Power) PoE+ Ethernet Smart Managed Pro Switch with 2 SFP Ports
Manage Device Security User Manual266
Note: You can download SSL certificates only when HTTPS is disabled.
8. In the HTTPS Port field, type the HTTPS port number.
The range is from 1025 to 65535. The default is port 443.
9. In the HTTPS Session Soft Timeout (Minutes)
field, enter the inactivity time-out for HTTPS
sessions.
The range is from 1 to 60 minutes. The default value is 5 minutes.
10. In the HTTPS
Session Hard Timeout (Hours) field, set the hard time-out for HTTPS
sessions.
This time-out is unaffected by the activity level of the session. The range
is from 1 to 168
hours. The default is 24 hours.
11. In the Maximum Number of HTTPS Sessions field, enter the maximum allowable number
of HTTPS sessions.
The range is from 1 to 4 sessions. The default is 4 sessions.
12. Click the Apply
button.
Your settings are saved.
Manage certificates for HTTPS access
You can manage certificates for HTTPS access.
Generate an SSL certificate
Note: Before you can generate a certificate, you must disable HTTPS (see
Configure HTTPS access settings on page 265) and log back in to the
local browser UI over an HTTP session. After you generate the
certificate, you can reenable HTTPS and log back in to the local
browser UI over an HTTPS session.
To generate an SSL certificate:
1. Connect your
computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ether
net cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Access the switch on-network and
connected to the Internet on page 18 or Access the switch off-network on page 27.
The Local Device Login page displays.
Loading ...
Loading ...
Loading ...