Loading ...
Loading ...
Loading ...
24-Port Gigabit (Hi-Power) PoE+ Ethernet Smart Managed Pro Switch with 2 SFP Ports
Configure System Information User Manual71
The Local Device Login page displays.
If you did not yet register the switch with your NETGEAR account, the Register
to unlock
all features page displays. For more information, see
Register the switch on page 31.
4. Enter one of the following passwords:
• After registration, enter the local device password.
By default, the local device password is password
.
You must change this password
at initial login.
• If you previously managed the switch through the Insight app or
Cloud portal, enter
the Insight network password for the last Insight network location.
For information about the credentials, see
Credentials for the local browser UI on
page 30.
5. Click the Login
button.
The System Information page displays.
6. Select System > Management
> Time > SNTP Server Configuration.
7. From the Server Type menu, select the type of SNTP address to enter in the address field.
The address can be either an IP address (IPv4 or IPv6) or a host name (DNS). The
default is IPv4.
8. In the Address
field, specify the IP address or the host name of the SNTP server.
This is a text string of up to 64 characters, containing the encoded unicast IP address or
host name of an SNTP server. Unicast SNTP requests are sent to this address. If this
address is a DNS host name, then that host name is resolved into an IP address each
time an SNTP request is sent to it.
9. If the
UDP port on the SNTP server to which SNTP requests are sent is not the standard
port (123),
specify the port number in the Port field.
The valid range is 1 to 65535. The default is 123.
10. In Priority field, specify
the priority order which to query the servers.
Loading ...
Loading ...
Loading ...