Loading ...
Loading ...
Loading ...
24-Port Gigabit (Hi-Power) PoE+ Ethernet Smart Managed Pro Switch with 2 SFP Ports
Configure Quality of Service User Manual218
Add and configure a DiffServ class
To add and configure a DiffServ class:
1. Connect your
computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ether
net cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Access the switch on-network and
connected to the Internet on page 18 or Access the switch off-network on page 27.
The Local Device Login page displays.
If you did not yet register the switch
with your NETGEAR account, the Register to unlock
all features page displays. For more information, see
Register the switch on page 31.
4. Enter one of the following passwords:
• After initial login, enter your local device password.
By default, the local device password is
password.
Y
ou must change this password
at initial login.
• If you previously managed the switch through the Insight app or Cloud portal, enter
the Insight network password for the last Insight network location.
For information about the credentials, see
Credentials for the local browser UI on
page 30.
5. Click the Login
button.
The System Information page displays.
6. Select QoS >
DiffServ > Advanced > Class Configuration.
The Class Name page displays.
7. In the Class
Name field, enter a class name.
The Class Name field also lists all existing DiffServ class names, from which you can
select one for modification or deletion. The class name can be
1 to 31 alphanumeric
characters in length.
The switch supports only the class type value All, which means that all the various match
criteria defined for the class are satisfied for a packet match. All sig
nifies the logical AND
statement of all the match criteria. For any class that you add, the class type is All.
8. Click the Add
button.
The new class is added.
9. After creating the class, click the class name.
The class name is a hyperlink to the page on which you can defi
ne the class
configuration.
Loading ...
Loading ...
Loading ...