Loading ...
Loading ...
Loading ...
24-Port Gigabit (Hi-Power) PoE+ Ethernet Smart Managed Pro Switch with 2 SFP Ports
Configure Switching User Manual132
7. In the Frame Size field, specify the maximum Ethernet frame size that each interface can
support.
The frame size includes the Ethernet header, CRC, and payload. The range is 1522 to
10000. The default maximum frame size is 1522.
8. Select whether to display physical interfaces, LAGs, or both by clicking one of the following
links above
the table heading:
•1 (the
unit ID of the switch). Only physical interfaces are displayed. This is the default
setting.
• LAG
. Only LAGs are displayed.
• All. Both physical interfaces and LAGs are displayed.
9. Select
one or more interfaces by taking one of the following actions:
• To configure a single interface, select the check box associated with the port, or type
the port number in the Go T
o Interface field and click the Go button.
• To configure multiple interfaces with the same settings, select the check box
associated with each interface.
• To configure all interfaces with the same settings, select the check box in the heading
row
.
10. In the Description field,
enter the description string to be attached to a port.
The string can be up to 64 characters in length.
11. From the Admin Mode
menu, select Enable or Disable.
This sets the port control administrative mode. You must select Enable in order for the
port to participate in the network. The default is Enable.
12. From the Autonegotiation
menu, select Enable or Disable.
This specifies the autonegotiation mode for this port. The default is Enable.
Note: After you change the autonegotiation mode, the switch might be
inaccessible for a
number of seconds while the new settings take effect.
13. In the Speed field,
specify the speed value for the selected port.
Loading ...
Loading ...
Loading ...