Loading ...
Loading ...
Loading ...
24-Port Gigabit (Hi-Power) PoE+ Ethernet Smart Managed Pro Switch with 2 SFP Ports
Manage Device Security User Manual290
7. From the MAC Filter menu, select Create Filter.
If you did not configure any filters, this is the only option available.
8. From the VLAN ID
menu, select the VLAN that must be used with the MAC address.
9. In the MAC Address
field, specify the MAC address of the filter in the format
XX:XX:XX:XX:XX:XX.
You cannot define filters for the following MAC addresses:
• 00:00:00:00:00:00
• 01:80:C2:00:00:00 to 01:80:C2:00:00:0F
• 01:80:C2:00:00:20 to 01:80:C2:00:00:21
• FF:FF:FF:FF:FF:FF
10. In
the Port and LAG tables in the Source Port Members section, select the ports and LAGs
that must
be included in the inbound filter.
If a packet with the MAC address and VLAN ID that you specify is received on
a port that
is not part of the inbound filter, the packet is dropped.
11. In the Port and LAG tables in the Destination Port Members section, select the ports and
LAGs that must be included in the outbound filter.
A packet with the MAC address and VLAN ID that you specify can be transmitted only
from a port that is part of the outbound filter.
Note: Destination
ports
can
be included only in a multicast filter. A multicast
filter is determined by the MAC address that you enter in the MAC
Address field.
Loading ...
Loading ...
Loading ...