GS724TPP-100NAS User Manual

Loading ...

24-Port Gigabit (Hi-Power) PoE+ Ethernet Smart Managed Pro Switch with 2 SFP Ports

Configure System Information User Manual85

If you did not yet register the switch with your NETGEAR account, the Register to unlock

all features page displays. For more information, see

4. Enter one of the following passwords:

• After registration, enter the local device password.

By default, the local device password is

password.

ou must change this password

at initial login.

• If you previously managed the switch through the Insight app or Cloud portal, enter

the Insight network password for the last Insight network location.

For information about the credentials, see

Credentials for the local browser UI on

page 30.

5. Click the Login

button.

The System Information page displays.

6. Select System >

Management > DNS > Host Configuration.

The DNS Host Configuration page displays.

7. Select the check box next to the entry to remove.

8. Click the Delete

button.

Change the host name or IP address in an entry of the dynamic host mapping

table and view all entries

To change the host name or IP address in an entry of the dynamic host mapping table

and view all entries:

1. Connect your computer to the same network as the switch.

You can use a WiFi or wired connection to connect your computer to the network, or

connect directly to a switch that is off-network using an Ether

net cable.

2. Launch a web browser.

3. In the address field of your web browser, enter the IP address of the switch.

If you do not know the IP address of the switch, see

Access the switch on-network and

connected to the Internet on page 18 or Access the switch off-network on page 27.

The Local Device Login page displays.

If you did not yet register the switch with your NETGEAR account, the