Loading ...
Loading ...
Loading ...
24-Port Gigabit (Hi-Power) PoE+ Ethernet Smart Managed Pro Switch with 2 SFP Ports
Configure Switching User Manual158
You can configure up to 32 OUIs.
8. In the Description
field, enter the description for the OUI.
The maximum length of description is 32 characters.
9. Click the Add
button.
The telephony OUI entry is added.
Delete one or more OUI prefixes from the OUI table
To delete one or more OUI prefixes from the OUI table:
1. Connect your
computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ether
net cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Access the switch on-network and
connected to the Internet on page 18 or Access the switch off-network on page 27.
The Local Device Login page displays.
If you did not yet register the switch
with your NETGEAR account, the Register to unlock
all features page displays. For more information, see
Register the switch on page 31.
4. Enter one of the following passwords:
• After initial login, enter your local device password.
By default, the local device password is
password.
Y
ou must change this password
at initial login.
• If you previously managed the switch through the Insight app or Cloud portal, enter
the Insight network password for the last Insight network location.
For information about the credentials, see
Credentials for the local browser UI on
page 30.
5. Click the Login
button.
The System Information page displays.
6. Select Switching >
Auto-VoIP > OUI-based > OUI Table.
The OUI Table page displays.
7. Select the check box next to each OUI prefix to be removed.
8. Click the Delete
button.
The telephony OUI entries are removed.
Loading ...
Loading ...
Loading ...