Loading ...
Loading ...
Loading ...
ERROR MESSAGES
410
■ Alarm Sounds
If the operation was performed incorrectly, an alarm
sounds to indicate that an error occurred. If the
operation was performed correctly, the machine
beeps to confirm the operation.
This message appears
when you press down the
sensor pen tip before
pressing and keep
pressing for the certain
period. Move the sensor
pen away from the current
position.
This message appears
when something is wrong
with the sensor unit of the
machine. Consult your
authorized Brother dealer.
This message appears
when you touch the invalid
area of sewing with the
sensor pen. Touch the
active area. (see page 100)
This message appears
when the time/date is not
set. Set time/date. (see
page 31)
This message appears
when you try to start
sewing utility/decorative
stitch or character pattern
with the embroidery foot
with the LED pointer
attached to the machine.
Remove the embroidery
foot with the LED pointer
before entering the sewing
mode. (see page 221)
This message appears
when you try to start
embroidering with the dual
feed foot attached to the
machine. Remove the dual
feed foot before entering
the embroidery mode. (see
page 72)
This message appears
when the function to
specify the sewing end
point cannot be used with
the current stitch. Select
other stitch. (see page 105)
This message appears
when the dual feed foot
cannot be used with the
current stitch. Select other
stitch.
This message appears
when the selected function
is not available with the
sensor function. (see page
100, 268)
Memo
• To cancel the operation beep or to change
the volume, press , display screen 4/9,
and then change the setting for “Machine
Speaker Volume”. See page 34 for more
details.
Loading ...
Loading ...
Loading ...