Loading ...
Loading ...
Loading ...
LCD SCREEN
Getting Ready
33
1
Using the Machine Setting Mode Key
Press to change the default machine settings (needle stop position, embroidery speed, opening
display, etc.). To display the different settings screens, press for “Sewing settings”, for
“General settings” or for “Embroidery settings”.
Sewing settings
a Select whether to use the sewing speed controller to determine the zigzag width (see page 133).
b Make adjustments to character or decorative stitch patterns (see page 176).
c Adjust the presser foot height. Select the height of the presser foot when the presser foot is raised.
d Adjust the presser foot pressure. The higher the number, the greater the pressure will be. Set the pressure at “3” for
normal sewing.
e Adjust the amount of fabric feeding of the dual feed foot (see page 74).
f Select whether “1-01 Straight stitch (Left)” or “1-03 Straight stitch (Middle)” is the utility stitch that is automatically
selected when the machine is turned on.
g Select whether “Utility Stitch” or “Quilt Stitch” displayed first on the stitch selection screen when the “Sewing” is
selected.
h You can activate this setting after connecting the multi-function foot controller. (These settings are not operable
unless the multi-function foot controller is attached to the machine.) (see page 84)
i Change the height of the presser foot when sewing is stopped when the pivot setting is selected (see page 95).
Adjust the presser foot to one of the three heights (3.2 mm, 5.0 mm and 7.5 mm).
j Change the height of the presser foot when the machine is set to free motion sewing mode (see page 133).
k When set to “ON”, the thickness of the fabric is automatically detected by an internal sensor while sewing. This
enables the fabric to be fed smoothly (see pages 88 and 97).
l When set to “ON”, reinforcement stitches are sewn at the beginning and/or end of sewing for a reinforcement stitch
pattern, even when the “Reverse Stitch” button is pressed (see page 85).
m Adjust the guideline marker position and brightness (see page 100).
n Press to save a settings screen image to USB media (see page 36).
o Press to reset settings. Some settings do not reset.
Memo
• Press or to display a different settings screen.
a
b
c
d
e
f
h
g
o
k
l
m
i
j
n
Loading ...
Loading ...
Loading ...