Loading ...
Loading ...
Loading ...
EMBROIDERING AN PATTERN
276
Spool Stand LED
This machine is equipped with a spool stand LED.
Its lighting status and color indicate the machine
status and thread color for embroidering.
a Spool stand LED
■ When Not Using the Spool Stand
LED
a
Press .
b
Press .
→ The General settings screen appears.
c
Display page 5 of the Embroidery settings
screen.
d
Set “Spool Stand LED” to “OFF”.
e
Press to return to the original screen.
Using Appliqués
This machine can sew patterns that contain an
appliqué. Follow the procedure described below
to sew patterns with (appliqué piece),
(appliqué position) and
(appliqué) in the embroidery color order display.
Required materials
• Fabric for the appliqué piece
• Fabric for the appliqué base
• Stabilizer material
• Craft glue
• Embroidery thread
Memo
• Use the color in which the LED lights up as
a guide. Since the actual embroidery thread
color may differ slightly, be sure to also
check the thread color number in the LCD.
Lit Lights up in thread color for
embroidering
Lit (color changing) Indicates thread spool replacement
(then lights up in embroidery thread
color)
Flashing (red) Error
Flashing (green) End of stitching
Memo
• When embroidering a pattern with
uninterrupted embroidering, the LED lights
up in gray.
• When embroidering an appliqué pattern, the
LED light indicates no color while
embroidering “
APPLIQUE
MATERIAL”, “
APPLIQUE
POSITION” or “
APPLIQUE”.
1. Create the appliqué piece.
È
2. Sew the appliqué position on the base
fabric.
È
3. Affix the appliqué piece to the base
fabric.
È
4. Embroider the remainder of the pattern.
Loading ...
Loading ...
Loading ...