Loading ...
Loading ...
Loading ...
My Design Center
8
LINE SCAN
355
→ When the following message appears, press .
→ Scanning begins.
* To stop scanning and return to the screen in
step
b, press .
c
When scanning is finished, specify the
“Gray-Scale Detection level” on the screen
if necessary.
The “Gray-Scale Detection level” can change the
black and white threshold for the image.
* If you do not know how the settings should be
changed, first continue the operation without
specifying settings and check the results.
* To stop scanning and return to the screen in
step b, press . The scanned image will be
deleted when you return to the previous screen.
d
Move to frame the image for the
pattern.
e
Press .
→ The screen for confirming the converted image
appears.
f
In the screen for confirming the converted
image, you can adjust the “Gray-Scale
Detection level” again, if necessary.
* If you do not know how the settings should be
changed, first continue the operation without
specifying settings and check the results.
* To enlarge the image, press .
* To display the image before being converted, press
. Compare the images before and after
being converted, and then change the settings if
necessary.
* To return to the previous screen, press .
→ After changes to the settings of “Detection level” is
applied, changes to . Press
to check that the image is as desired.
g
Press .
Note
• When scanning starts, some of the machine
lights will turn off in a certain
circumstances, in order to increase the
scan quality. The machine lights will return
to their original brightness when scanning
ends.
Loading ...
Loading ...
Loading ...