Loading ...
Loading ...
Loading ...
LCD SCREEN
34
General settings
a Select the needle stop position (the needle position when the machine is not operating) to be up or down. Select
the down position when using the pivot key.
b Select the operation of the “Needle Position - Stitch Placement” button from the following two sequences (see
page 98).
Each press of the “Needle Position - Stitch Placement” button:
“ON” – raises the needle, stops it at a nearly lowered position, then lowers it
“OFF” – raises the needle, then lowers it
c Change the shape of the pointer when a USB mouse is used (see page 37).
d Turn both the upper and bobbin thread sensor “ON” or “OFF”. If it is turned “OFF”, the machine can be used
without thread.
e Change the speaker volume. Increase the number for louder volume, decrease for softer volume.
f Change the headphone (external speakers) volume.
g Change the brightness of the needle area and work area lights.
h Change the screen display brightness (see page 391).
i Select to save the machine power by setting the “Eco Mode” or the “Shutoff Support Mode” (see page 36).
j Select the length of time until the screen saver appears. A setting between “OFF” (0) and “60” minutes can be set in
1-minute increments.
k Change the image of the screen saver (see page 37).
l Select the initial screen that is displayed when the machine is turned on (see page 38).
m Turn on or off the spool stand LED indicator (see page 276).
n Change the display language (see page 39).
o Calibrate the sensor function (see page 52).
p Display the service count which is a reminder to take your machine in for regular servicing. (Contact your
authorized Brother dealer for details.)
q Display the total number of stitches sewn on this machine.
r The “No.” is the internal machine number for the embroidery and sewing machine.
s Display the program version.
CAUTION
• If “Upper and Bobbin Thread Sensor” is set to “OFF”, remove the upper thread. If the machine is used
with the upper thread threaded, the machine will not be able to detect if the thread has become tangled.
Continuing to use the machine with tangled thread may cause damage.
Memo
• The latest version of software is installed in your machine. Check with your local authorized Brother
dealer or at “ http://support.brother.com
” for available updates (see page 412).
a
d
f
g
b
h
c
e
j
o
n
i
k
l
m
s
r
p
q
Loading ...
Loading ...
Loading ...