Brother INNOV-IS XV8500D Embroidery and Sewing Machine

Operation Manual - Page 138

For INNOV-IS XV8500D.

PDF File Manual, 428 pages, Read Online | Download pdf file

INNOV-IS XV8500D photo
Loading ...
Loading ...
Loading ...
SEWING THE STITCHES
136
Using free motion Open Toe Quilting Foot “O”
The free motion open toe quilting foot “O” is used
for free motion quilting with zigzag or decorative
stitches or for free motion quilting of straight lines on
fabric with an uneven thickness. Various stitches
can be sewn using free motion open toe quilting foot
“O”. For details on the stitches that can be used,
refer to the “STITCH SETTING CHART” at the end of
this manual.
Free motion open toe quilting foot “O”
a
Press to set the machine to free motion
sewing mode.
The key appears as , the quilting foot is raised
to the necessary height, and then the feed dogs are
lowered for free motion sewing.
b
Select a stitch.
c
Remove the presser foot holder (see page
71).
d
Attach free motion open toe quilting foot
“O” by positioning the pin of the quilting
foot above the needle clamp screw and
aligning the lower-left of the quilting foot
and the presser bar.
a Pin
b Needle clamp screw
c Presser bar
e
Hold the quilting foot in place with your
right hand, and tighten the presser foot
holder screw using the multi-purpose
screwdriver with your left hand.
* Use the multi-purpose screw driver setting the
position to “1”. (see page 24)
a Presser foot holder screw
f
Use both hands to stretch the fabric taut,
and then move the fabric at a consistent
pace in order to sew uniform stitches
roughly 2.0-2.5 mm (approx. 1/16 - 3/32
inch) in length.
a Stitch
Memo
In order to sew with a balanced tension, it
may be necessary to adjust the upper
thread tension (see page 92). Test with a
sample piece of quilting fabric.
Memo
When stitch Q-01 or 1-31 is selected, free
motion quilting foot “C” is indicated in the
upper-left corner of the screen. When the
other stitches are selected, free motion
open toe quilting foot “O” is indicated in the
screen.
O
O
Note
Make sure that the quilting foot is not
slanted.
CAUTION
Be sure to securely tighten the screws with the
included multi-purpose screwdriver.
Otherwise, the needle may touch the quilting
foot, causing it to bend or break.
Loading ...
Loading ...
Loading ...