Loading ...
Loading ...
Loading ...
25 CHECK ASCD CLUTCH SWITCH CIRCUIT FOR OPEN AND SHORT
1. Turn ignition switch “OFF”.
2. Check continuity between ASCD clutch switch terminal 2 and ECM terminal 59.
Continuity should exist.
3. Also check harness for short to ground and short to power.
OK or NG
OK © GO TO 27.
NG © GO TO 26.
26 DETECT MALFUNCTIONING PART
Check the following.
I Harness connectors M162, F55
I Harness for open or short between ASCD clutch switch and ECM
© Repair open circuit or short to ground or short to power in harness or connectors.
27 CHECK ASCD CLUTCH SWITCH
Refer to “Component Inspection”, EC-661.
OK or NG
OK © GO TO 28.
NG © Replace ASCD clutch switch.
28 CHECK STOP LAMP SWITCH POWER SUPPLY CIRCUIT
1. Turn ignition switch “OFF”.
2. Disconnect stop lamp switch harness connector.
3. Check voltage between stop lamp switch terminal 1 and ground with CONSULT-II or tester.
PBIB0117E
Voltage: Battery voltage
OK or NG
OK © GO TO 30.
NG © GO TO 29.
29 DETECT MALFUNCTIONING PART
Check the following.
I Fuse block (J/B) connector M17
I 15A fuse
I Harness connectors M15, E81
I Harness for open or short between stop lamp switch and fuse
© Repair open circuit or short to ground in harness or connectors.
GI
MA
EM
LC
FE
CL
MT
AT
AX
SU
BR
ST
RS
BT
HA
SC
EL
IDX
ASCD BRAKE SWITCH
Diagnostic Procedure (Cont’d)
EC-739
Loading ...
Loading ...
Loading ...