Loading ...
Loading ...
Loading ...
DTC Confirmation Procedure
NFEC1437
NOTE:
If “DTC Confirmation Procedure” has been previously conducted,
always turn ignition switch “OFF” and wait at least 10 seconds
before conducting the next test.
TESTING CONDITION:
Before performing the following procedure, confirm that bat-
tery voltage is more than 10V at idle.
SEF058Y
With CONSULT-II
1. Turn ignition switch “ON”.
2. Select “DATA MONITOR” mode with CONSULT-II.
3. Start engine and let it idle for 1 second.
4. If DTC is detected, go to “Diagnostic Procedure”, EC-300.
With GST
Follow the procedure “WITH CONSULT-II” above.
DTC P0222, P0223 TP SENSOR
DTC Confirmation Procedure
EC-298
Loading ...
Loading ...
Loading ...