Loading ...
Loading ...
Loading ...
14 CHECK EVAP CANISTER VENT CONTROL VALVE-I
1. Remove EVAP canister vent control valve from EVAP canister.
2. Check portion B of EVAP canister vent control valve for being rusted.
SEF376Z
OK or NG
OK © GO TO 15.
NG © Replace EVAP canister vent control valve.
15 CHECK EVAP CANISTER VENT CONTROL VALVE-II
With CONSULT-II
1. Reconnect harness disconnected connectors.
2. Turn ignition switch ON.
3. Perform “VENT CONTROL/V” in “ACTIVE TEST” mode.
4. Check air passage continuity and operation delay time.
SEC158D
Without CONSULT-II
Check air passage continuity and operation delay time under the following conditions.
SEF378Z
Make sure new O-ring is installed properly.
OK or NG
OK © GO TO 17.
NG © GO TO 16.
DTC P1491 VACUUM CUT VALVE BYPASS VALVE
Diagnostic Procedure (Cont’d)
EC-638
Loading ...
Loading ...
Loading ...