Loading ...
Loading ...
Loading ...
Diagnostic Procedure
NFEC1141
FOR M/T MODELS
NFEC1141S01
1 CHECK PNP SWITCH GROUND CIRCUIT FOR OPEN AND SHORT
1. Turn ignition switch “OFF”.
2. Disconnect park/neutral position (PNP) switch harness connector.
SEC067D
3. Check harness continuity between PNP switch terminal 2 and engine ground. Refer to Wiring Diagram.
Continuity should exist.
4. Also check harness for short to power.
OK or NG
OK © GO TO 3.
NG © GO TO 2.
2 DETECT MALFUNCTIONING PART
Check the following.
I Harness connectors F211, F66
I Harness for open or short between park/neutral position (PNP) switch and ground
© Repair open circuit or short to power in harness or connectors.
3 CHECK PNP SWITCH INPUT SIGNAL CIRCUIT FOR OPEN AND SHORT
1. Disconnect ECM harness connector.
2. Check harness continuity between ECM terminal 44 and PNP switch terminal 1. Refer to Wiring Diagram.
Continuity should exist.
3. Also check harness for short to ground and short to power.
OK or NG
OK © GO TO 5.
NG © GO TO 4.
4 DETECT MALFUNCTIONING PART
Check the following.
I Harness connectors F66, F211
I Harness for open or short between park/neutral position (PNP) switch and ECM
© Repair open circuit or short to ground or short to power in harness or connectors.
5 CHECK PARK/NEUTRAL POSITION (PNP) SWITCH
Refer to MT section, “Position Switch Check”.
OK or NG
OK © GO TO 6.
NG © Replace park/neutral position (PNP) switch.
DTC P1706 PNP SWITCH
Diagnostic Procedure
EC-670
Loading ...
Loading ...
Loading ...