Loading ...
Loading ...
Loading ...
6 DETECT MALFUNCTIONING PART
Check the following.
I Harness connectors B3, M6
I Harness connectors M81, F49
I Harness for open or short between EVAP canister vent control valve and ECM
© Repair open circuit or short to ground or short to power in harness or connectors.
7 CHECK RUBBER TUBE FOR CLOGGING
1. Disconnect rubber tube connected to EVAP canister vent control valve.
2. Check the rubber tube for clogging.
OK or NG
OK © GO TO 8.
NG © Clean the rubber tube using an air blower.
8 CHECK EVAP CANISTER VENT CONTROL VALVE-I
1. Remove EVAP canister vent control valve from EVAP canister.
2. Check portion B of EVAP canister vent control valve for being rusted.
SEF376Z
OK or NG
OK © GO TO 9.
NG © Replace EVAP canister vent control valve.
DTC P0447 EVAP CANISTER VENT CONTROL VALVE
Diagnostic Procedure (Cont’d)
EC-388
Loading ...
Loading ...
Loading ...