Loading ...
Loading ...
Loading ...
11 PERFORM ACCELERATOR PEDAL RELEASED POSITION LEARNING
1. Stop engine.
2. Perform “Accelerator Pedal Released Position Learning”, EC-71.
© GO TO 12.
12 PERFORM THROTTLE VALVE CLOSED POSITION LEARNING
Perform “Throttle Valve Closed Position Learning”, EC-71.
© GO TO 13.
13 PERFORM IDLE AIR VOLUME LEARNING
Perform “Idle Air Volume Learning”, EC-71.
Which is the result CMPLT or INCMP?
CMPLT or INCMP
CMPLT © GO TO 14.
INCMP © 1. Follow the construction of “Idle Air Volume Learning”.
2. GO TO 4.
14 CHECK TARGET IDLE SPEED AGAIN
With CONSULT-II
1. Start engine and warm it up to normal operating temperature.
2. Read idle speed in “DATA MONITOR” mode with CONSULT-II.
M/T: 625±50 rpm
A/T: 675±50 rpm (in “P” or “N” position)
Without CONSULT-II
1. Start engine and warm it up to normal operating temperature.
2. Check idle speed.
M/T: 625±50 rpm
A/T: 675±50 rpm (in “P” or “N” position)
OK or NG
OK © GO TO 15.
NG © GO TO 17.
15 CHECK IGNITION TIMING AGAIN
1. Run engine at idle.
2. Check ignition timing with a timing light.
M/T: 15°±5° BTDC
A/T: 15°±5° BTDC (in “P” or “N” position)
OK or NG
OK (With CONSULT-II) © GO TO 19.
OK (Without CONSULT-
II)
© GO TO 20.
NG © GO TO 16.
GI
MA
EM
LC
FE
CL
MT
AT
AX
SU
BR
ST
RS
BT
HA
SC
EL
IDX
BASIC SERVICE PROCEDURE
Idle Speed/Ignition Timing/Idle Mixture Ratio Adjustment (Cont’d)
EC-65
Loading ...
Loading ...
Loading ...