Loading ...
Loading ...
Loading ...
5 CHECK VIAS CONTROL SOLENOID VALVE POWER SUPPLY CIRCUIT
1. Stop engine.
2. Disconnect VIAS control solenoid valve harness connector.
SEC058D
3. Turn ignition switch “ON”.
4. Check voltage between terminal 1 and ground with CONSULT-II or tester.
SEF603X
OK or NG
OK © GO TO 7.
NG © GO TO 6.
6 DETECT MALFUNCTIONING PART
Check the following.
I Harness connectors M161, F68
I Fuse block (J/B) connector M19
I 15A fuse
I Harness continuity between fuse and VIAS control solenoid valve
© Repair harness or connectors.
7 CHECK VIAS CONTROL SOLENOID VALVE OUTPUT SIGNAL CIRCUIT FOR OPEN AND SHORT
1. Turn ignition switch “OFF”.
2. Disconnect ECM harness connector.
3. Check harness continuity between ECM terminal 27 and terminal 2. Refer to Wiring Diagram.
Continuity should exist.
4. Also check harness for short to ground and short to power.
OK or NG
OK © GO TO 8.
NG © Repair open circuit or short to ground or short to power in harness or connectors.
VARIABLE INDUCTION AIR CONTROL SYSTEM (VIAS)
Diagnostic Procedure (Cont’d)
EC-690
Loading ...
Loading ...
Loading ...