Loading ...
Loading ...
Loading ...
3 CHECK TARGET IDLE SPEED
With CONSULT-II
1. Run engine at about 2,000 rpm for about 2 minutes under no-load.
2. Rev engine (2,000 to 3,000 rpm) two or three times under no-load, then run engine at idle speed for about 1 minute.
SEF978U
3. Read idle speed in “DATA MONITOR” mode with CONSULT-II.
SEF058Y
M/T: 625±50 rpm
A/T: 675±50 rpm (in “P” or “N” position)
Without CONSULT-II
1. Run engine at about 2,000 rpm for about 2 minutes under no-load.
2. Rev engine (2,000 to 3,000 rpm) two or three times under no-load, then run engine at idle speed for about 1 minute.
3. Check idle speed.
M/T: 625±50 rpm
A/T: 675±50 rpm (in “P” or “N” position)
OK or NG
OK © GO TO 9.
NG © GO TO 4.
4 PERFORM ACCELERATOR PEDAL RELEASED POSITION LEARNING
1. Stop engine.
2. Perform “Accelerator Pedal Released Position Learning”, EC-71.
© GO TO 5.
5 PERFORM THROTTLE VALVE CLOSED POSITION LEARNING
Perform “Throttle Valve Closed Position Learning”, EC-71.
© GO TO 6.
GI
MA
EM
LC
FE
CL
MT
AT
AX
SU
BR
ST
RS
BT
HA
SC
EL
IDX
BASIC SERVICE PROCEDURE
Idle Speed/Ignition Timing/Idle Mixture Ratio Adjustment (Cont’d)
EC-63
Loading ...
Loading ...
Loading ...