Loading ...
Loading ...
Loading ...
SEF013Y
WITH CONSULT-II
NFEC0948S03
1) Turn ignition switch “ON”.
2) Select “DATA MONITOR” mode with CONSULT-II.
3) Crank engine for at least 2 seconds and run it for at least 5
seconds at idle speed.
4) If 1st trip DTC is detected, go to “Diagnostic Procedure”,
EC-342. If 1st trip DTC is not detected, go to next step.
5) Maintaining engine speed at more than 1,000 rpm for at least
5 seconds.
6) If 1st trip DTC is detected, go to “Diagnostic Procedure”,
EC-342.
WITH GST
NFEC0948S04
Follow the procedure “With CONSULT-II” above.
DTC P0340, P0345 CMP SENSOR (PHASE)
DTC Confirmation Procedure (Cont’d)
EC-338
Loading ...
Loading ...
Loading ...