Loading ...
Loading ...
Loading ...
With GST
Follow the procedure “With CONSULT-II” above.
Diagnostic Procedure
NFEC1364
1 CHECK ELECTRIC THROTTLE CONTROL ACTUATOR VISUALLY
1. Turn ignition switch “OFF”.
2. Remove the intake air duct.
3. Check if foreign matter is caught between the throttle valve and the housing.
SEC083D
OK or NG
OK © GO TO 2.
NG © Remove the foreign matter and clean the electric throttle control actuator inside.
2 REPLACE ELECTRIC THROTTLE CONTROL ACTUATOR
1. Replace the electric throttle control actuator.
2. Perform “Throttle Valve Closed Position Learning”, EC-71.
3. Perform “Idle Air Volume Learning”, EC-71.
© INSPECTION END
DTC P1226 TP SENSOR
DTC Confirmation Procedure (Cont’d)
EC-560
Loading ...
Loading ...
Loading ...