Loading ...
Loading ...
Loading ...
DTC Confirmation Procedure
NFEC1468
CAUTION:
Always drive vehicle at a safe speed.
NOTE:
If “DTC Confirmation Procedure” has been previously conducted,
always turn ignition switch “OFF” and wait at least 10 seconds
before conducting the next test.
TESTING CONDITION:
Steps 3 and 4 may be conducted with the drive wheels lifted
in the shop or by driving the vehicle. If a road test is expected
to be easier, it is unnecessary to lift the vehicle.
SEC010D
With CONSULT-II
1) Start engine (TCS switch “OFF”).
2) Select “DATA MONITOR” mode with CONSULT-II.
3) Drive the vehicle for at least 5 consecutive seconds under the
following condition.
VHCL SPEED SE More than 30 km/h (19 MPH)
Selector lever Suitable position
If 1st trip DTC is detected, go to “Diagnostic Procedure”,
EC-651.
If 1st rip DTC is not detected, go to the following step.
4) Drive the vehicle for at least 5 consecutive seconds under the
following condition.
VHCL SPEED SE More than 30 km/h (19 MPH)
Selector lever Suitable position
Driving location
Depress the brake pedal for more
than five seconds so as not to come
off from the above-mentioned condi-
tion.
5) If 1st trip DTC is detected, go to “Diagnostic Procedure”,
EC-651.
With GST
Follow the procedure “With CONSULT-II” above.
DTC P1572 ASCD BRAKE SWITCH
DTC Confirmation Procedure
EC-648
Loading ...
Loading ...
Loading ...