Loading ...
Loading ...
Loading ...
WITH GST
NFEC1477S02
NOTE:
Be sure to read the explanation of “Driving Pattern” on EC-83
before driving vehicle.
1) Start engine.
2) Drive vehicle according to “Driving Pattern”, EC-83.
3) Stop vehicle.
4) Select “MODE 1” with GST.
I If SRT of EVAP system is not set yet, go to the following step.
I If SRT of EVAP system is set, the result will be OK.
5) Turn ignition switch “OFF” and wait at least 10 seconds.
6) Start engine.
It is not necessary to cool engine down before driving.
7) Drive vehicle again according to the “Driving Pattern”, EC-83.
8) Stop vehicle.
9) Select “MODE 3” with GST.
I If P0455 is displayed on the screen, go to “Diagnostic
Procedure”, EC-407.
I If P0442 is displayed on the screen, go to “Diagnostic
Procedure”, for DTC P0442, EC-363.
I If P0441 is displayed on the screen, go to “Diagnostic Proce-
dure” for DTC P0441, EC-354.
I If P0455, P0442 and P0441 are not displayed on the screen,
go to the following step.
10) Select “MODE 1” with GST.
I If SRT of EVAP system is set, the result will be OK.
I If SRT of EVAP system is not set, go to step 6.
Diagnostic Procedure
NFEC1478
1 CHECK FUEL FILLER CAP DESIGN
1. Turn ignition switch “OFF”.
2. Check for genuine NISSAN fuel filler cap design.
SEF915U
OK or NG
OK © GO TO 2.
NG © Replace with genuine NISSAN fuel filler cap.
GI
MA
EM
LC
FE
CL
MT
AT
AX
SU
BR
ST
RS
BT
HA
SC
EL
IDX
DTC P0455 EVAP CONTROL SYSTEM (GROSS LEAK)
DTC Confirmation Procedure (Cont’d)
EC-407
Loading ...
Loading ...
Loading ...