Loading ...
Loading ...
Loading ...
5 CHECK COOLING FAN HIGH SPEED OPERATION
Without CONSULT-II
1. Turn ignition switch “OFF”.
2. Reconnect cooling fan relays-2 and -3.
3. Turn air conditioner switch and blower fan switch “OFF”.
4. Disconnect engine coolant temperature sensor harness connector.
5. Connect 150Ω resistor to engine coolant temperature sensor harness connector.
6. Restart engine and make sure that cooling fans-1 and -2 operate at high speed.
MEC475B
OK or NG
OK © GO TO 6.
NG © Check cooling fan high speed control circuit. (Go to PROCEDURE B, EC-547.)
6 CHECK COOLING SYSTEM FOR LEAK
Apply pressure to the cooling system with a tester, and check if the pressure drops.
Testing pressure: 157 kPa (1.6 kg/cm
2
, 23 psi)
CAUTION:
Higher than the specified pressure may cause radiator damage.
SLC754A
Pressure should not drop.
OK or NG
OK © GO TO 8.
NG © GO TO 7.
7 DETECT MALFUNCTIONING PART
Check the following for leak.
I Hose
I Radiator
I Water pump (Refer to LC-14, “Water Pump”.)
© Repair or replace.
GI
MA
EM
LC
FE
CL
MT
AT
AX
SU
BR
ST
RS
BT
HA
SC
EL
IDX
DTC P1217 ENGINE OVER TEMPERATURE
Diagnostic Procedure (Cont’d)
EC-541
Loading ...
Loading ...
Loading ...