Loading ...
Loading ...
Loading ...
SEF174Y
WITH CONSULT-II
NFEC0922S01
1) Turn ignition switch “ON”.
2) Select “DATA MONITOR” mode with CONSULT-II.
3) Wait at least 10 seconds.
If the result is NG, go to “Diagnostic Procedure”, EC-288.
If the result is OK, go to following step.
4) Check “COOLAN TEMP/S” value.
If “COOLAN TEMP/S” is less than 60°C (140°F), the result will
be OK.
If “COOLAN TEMP/S” is above 60°C (140°F), go to the follow-
ing step.
5) Cool engine down until “COOLAN TEMP/S” is less than 60°C
(140°F).
6) Wait at least 10 seconds.
7) If 1st trip DTC is detected, go to “Diagnostic Procedure”,
EC-288.
WITH GST
NFEC0922S02
Follow the procedure “With CONSULT-II” above.
DTC P0182, P0183 FTT SENSOR
DTC Confirmation Procedure (Cont’d)
EC-286
Loading ...
Loading ...
Loading ...