Loading ...
Loading ...
Loading ...
5 CHECK EVAP PURGE HOSE AND PURGE PORT
1. Disconnect purge hoses connected to EVAP service port A and EVAP canister purge volume control solenoid valve B.
SEF367U
2. Blow air into each hose and EVAP purge port C.
3. Check that air flows freely.
SEF368U
OK or NG
OK (With CONSULT-II) © GO TO 6.
OK (Without CONSULT-
II)
© GO TO 7.
NG © Repair or clean hoses and/or purge port.
6 CHECK EVAP CANISTER PURGE VOLUME CONTROL SOLENOID VALVE
With CONSULT-II
1. Start engine.
2. Perform “PURG VOL CONT/V” in “ACTIVE TEST” mode with CONSULT-II. Check that engine speed varies according
to the valve opening.
SEC142D
OK or NG
OK © GO TO 8.
NG © GO TO 7.
DTC P0441 EVAP CONTROL SYSTEM
Diagnostic Procedure (Cont’d)
EC-356
Loading ...
Loading ...
Loading ...