Loading ...
Loading ...
Loading ...
Specification data are reference values and are measured between each terminal and body ground.
CAUTION:
Do not use ECM ground terminals when measuring input/output voltage. Doing so may result in dam-
age to the ECM’s transistor. Use a ground other than ECM terminals, such as the ground.
TER-
MINAL
NO.
WIRE
COLOR
ITEM CONDITION DATA (DC Voltage)
58 B Sensors’ ground
[Engine is running]
I Warm-up condition
I Idle speed
Approximately 0V
89 W/L
Power steering pres-
sure sensor
[Engine is running]
I Steering wheel is being turned.
0.5 - 4.0V
[Engine is running]
I Steering wheel is not being turned.
0.4 - 0.8V
111 R Sensors’ power supply [Ignition switch “ON”] Approximately 5V
Diagnostic Procedure
NFEC1254
1 RETIGHTEN GROUND SCREWS
1. Turn ignition switch “OFF”.
2. Loosen and retighten engine ground screws.
SEC047D
© GO TO 2.
DTC P0550 PSP SENSOR
Wiring Diagram (Cont’d)
EC-452
Loading ...
Loading ...
Loading ...