Loading ...
Loading ...
Loading ...
Diagnostic Procedure
NFEC0851
1 INSPECTION START
With CONSULT-II
1. Turn ignition switch ON.
2. Select “SELF DIAG RESULTS” mode with CONSULT-II.
3. Touch “ERASE”.
4. Perform “DTC Confirmation Procedure”.
See EC-201.
5. Is the 1st trip DTC P0107 or P0108 displayed again?
With GST
1. Turn ignition switch ON.
2. Select MODE 4 with GST.
3. Touch “ERASE”.
4. Perform “DTC Confirmation Procedure”.
See EC-201.
5. Is the 1st trip DTC P0107 or P0108 displayed again?
YesorNo
Yes © GO TO 2.
No © INSPECTION END
2 REPLACE ECM
1. Replace ECM.
2. Perform initialization of NVIS (NATS) system and registration of all NVIS (NATS) ignition key IDs. Refer to “NVIS (NIS-
SAN VEHICLE IMMOBILIZER SYSTEM — NATS)”, EC-92.
3. Perform “Accelerator Pedal Released Position Learning”, EC-71.
4. Perform “Throttle Valve Closed Position Learning”, EC-71.
5. Perform “Idle Air Volume Learning”, EC-71.
© INSPECTION END
DTC P0107, P0108 ABSOLUTE PRESSURE SENSOR
Diagnostic Procedure
EC-202
Loading ...
Loading ...
Loading ...