Loading ...
Loading ...
Loading ...
3) Stop vehicle.
4) Select “MODE 1” with GST.
I If SRT of EVAP system is not set yet, go to the following step.
I If SRT of EVAP system is set, the result will be OK.
5) Turn ignition switch “OFF” and wait at least 10 seconds.
6) Start engine.
It is not necessary to cool engine down before driving.
7) Drive vehicle again according to the “Driving Pattern”, EC-83.
8) Stop vehicle.
9) Select “MODE 3” with GST.
I If P0442 is displayed on the screen, go to “Diagnostic
Procedure”, EC-363.
I If P0441 is displayed on the screen, go to “Diagnostic Proce-
dure” for DTC P0441, EC-354.
I If P0441 and P0442 are not displayed on the screen, go to the
following step.
10) Select “MODE 1” with GST.
I If SRT of EVAP system is set, the result will be OK.
I If SRT of EVAP system is not set, go to step 6.
Diagnostic Procedure
NFEC0962
1 CHECK FUEL FILLER CAP DESIGN
1. Turn ignition switch “OFF”.
2. Check for genuine NISSAN fuel filler cap design.
SEF915U
OK or NG
OK © GO TO 2.
NG © Replace with genuine NISSAN fuel filler cap.
2 CHECK FUEL FILLER CAP INSTALLATION
Check that the cap is tightened properly by rotating the cap clockwise.
OK or NG
OK © GO TO 3.
NG © I Open fuel filler cap, then clean cap and fuel filler neck threads using air blower.
I Retighten until ratcheting sound is heard.
GI
MA
EM
LC
FE
CL
MT
AT
AX
SU
BR
ST
RS
BT
HA
SC
EL
IDX
DTC P0442 EVAP CONTROL SYSTEM
DTC Confirmation Procedure (Cont’d)
EC-363
Loading ...
Loading ...
Loading ...