Loading ...
Loading ...
Loading ...
92 GETTING TO KNOW YOUR VEHICLE
7. Using the provided #50 Torx head driver and ratchet,
unscrew the Torx screw on both rear corners of the
vehicle, removing the retainers.
Remove Rear Retainers
Installing The Soft Top — Four Door Models
NOTE:
The following procedures are for first time set up only. For
future s
oft top procedures, refer to “Soft Top” in this section.
1. Locate and remove the following items prior to hard top
removal
:
• Right and left side door rails
• Eight d
oor frame attachment Torx head screws
• Right a
nd left side quarter windows
• Rear wi
ndow
• Swing gat
e bar
2. Remov
e the hard top. Refer to “Rear Hard Top Removal”
in this
section.
3. Install the door rails, starting with the front, followed by the
rear on
each side. Refer to “Door Frame Installation — Four
Door Models” in this section for instructions and appro
-
priate torque specifications for the door rail Torx screws.
4. I
nstall the rear retainers on each side of the rear of the
vehicle
using the provided #50 Torx head driver and
ratchet.
Refer to the table below for recommended torque
specifications.
Loading ...
Loading ...
Loading ...