Loading ...
Loading ...
Loading ...
168 GETTING TO KNOW YOUR VEHICLE
Raising The Windshield
1. Release the strap that secured the windshield in the
lowered position.
2. Raise the windshield.
3. Using
the provided #40 Torx h
ead driver, reinstall the
four Torx screws located along the interior of the wind-
shield. Secure them until they are snug, being careful not
t
o cross
-thread the screws or overtighten.
Interior Torx Screw Locations
4. Reinstall the windshield wiper arms using the provided
15 mm so
cket. First, align the tips of the blade to the “T”
mark in t
he glass. Then, while holding the arm in that
position, reinstall the hex nut and tighten until snug. Be
careful not to over-tighten. Repeat for the other arm.
5. Replace the protective caps over the wiper arm hex bolts
and pus
h gently until they snap into place.
Protective Cap Over Wiper Bolt
Loading ...
Loading ...
Loading ...