Loading ...
Loading ...
Loading ...
GETTING TO KNOW YOUR VEHICLE 161
Relearn Procedure
For vehicles equipped with a power top, there is a relearn
procedure that allows you to calibrate the power top when
the “Express Mode” stops working. To reset the power top,
follow these steps:
1. Place the ignition in the RUN position, and start the
vehicl
e.
NOTE:
The engine must be running to perform the relearn proce-
dure.
2. E
nsure the power top is in the fully closed position.
3. Push
and hold the Close switch for 10 seconds. This will
put th
e power top into calibration mode.
4. Continue holding down the close button while the top
goes fu
lly open and then back to fully close.
5. Once the power top has stopped in the fully closed posi-
tion,
release the close button. The power top is now reset
and rea
dy to use.
NOTE:
If the close button is released anytime during the relearning
p
rocess
, the relearn may not be complete, and the procedure
must be repeated.
Rear Quarter Window Removal
On vehicles equipped with a Power Sliding Top, the rear
quarter windows can be removed. To remove these
windows, follow the procedure below:
1. Open the swing gate, and lift the rear window.
2. Open
both side doors nearest the quarter windows.
3. Loca
te the rear quarter window latches (two on each
window)
on the interior of the windows.
4. Rotate the left hand side latch clockwi
se to release.
2
Loading ...
Loading ...
Loading ...