Loading ...
Loading ...
Loading ...
STARTING AND OPERATING 375
To Resume Speed
To resume a previously set speed, push the RES button and
release
. Resume can be used at any speed above 20 mph
(32 km/h).
T
o Turn Off
The system will turn off and erase the set speed in memory if:
• T
he Normal (Fixed Speed) Cruise Control on/off button is
pushed
.
• The ignition is turned OFF.
• You en
gage Four-Wheel Drive Low.
• The Ad
aptive Cruise Control (ACC) on/off button is
pushed
.
PARKSENSE REAR PARK ASSIST — IF EQUIPPED
The ParkSense Rear Park Assist system provides visual and
audible indications of the distance between the rear fascia
and a detected obstacle when backing up, e.g. during a
parking maneuver. Refer to “ParkSense System Usage
Precautions” in this section for limitations of this system and
recommendations.
ParkSense will retain the last system state (enabled or
disable
d) from the last ignition cycle when the ignition is
changed to the ON/RUN position.
ParkSense can be active only when the gear selector is in
REVERSE
. If ParkSense is enabled at this gear selector posi-
tion, the system will remain active until the vehicle speed is
i
ncreas
ed to approximately 7 mph (11 km/h) or above.
When in
REVERSE and above the system's operating speed,
a warning will appear within the instrument cluster display
indicating the vehicle speed is too fast. The system will
become active again if the vehicle speed is decreased to
speeds less than approximately 6
mph (9 km/h).
ParkSense Sensors
The four ParkSense sensors, located in the rear fascia/bumper,
monitor the area behind the vehicle that is within the sensors’
field of view. The sensors can detect obstacles from approxi
-
mately 12 inches (30 cm) up to 79 inches (200 cm) from the rear
fascia/
bumper in the horizontal direction, depending on the
location, type and orientation of the obstacle.
5
Loading ...
Loading ...
Loading ...