Loading ...
Loading ...
Loading ...
402 STARTING AND OPERATING
Bumper End Cap Removal
The end caps on your vehicle’s front bumper can be removed
by followi
ng the steps below:
NOTE:
Bumper end caps are removable on steel bumper only.
1. L
oosen the two bolts that retain the GAWR bracket (Bolts
#1 and #2
) to the end cap using a T45 torx bit screw
driver. Do not remove the bolts.
Bolt #1
Bolt #2
2. Remove the remaining 8 bolts. The end cap can now be
expande
d open.
3. Gently remove the end cap from the vehicle and store it
where it
will not get damaged.
4. Repeat this procedure on the other side.
Loading ...
Loading ...
Loading ...