User Manual - Page 29

For 2019 Wrangler.

Loading ...
Loading ...
Loading ...
GETTING TO KNOW YOUR VEHICLE 27
Remote Start Cancel Message — If Equipped
The following messages will display in the instrument
cluster if the vehicle fails to remote start or exits remote start
prematurely:
Remote Start Cancelled — Door Open
Remote
Start Cancelled — Hood Open
Remote
Start Cancelled — Fuel Low
Remote
Start Cancelled — Swing Gate Open
Remote
Start Cancelled — Time Expired
Remote
Start Disabled — Start Vehicle To Reset
The me
ssage will stay active until the ignition is placed in the
ON/RUN p
osition.
To Enter Remote Start Mode
Push and release the Remote Start button on the key fob
twice within five seconds. The vehicle doors will lock, the
turn signals will flash twice, and the horn will chirp twice.
Then the engine will start, and the vehicle will remain in the
Remote Start mode for a 15-minute cycle.
NOTE:
I
f an engine fault is present or fuel level is low, the vehicle
will st
art and then shut down in 10 seconds.
The park lamps will turn on and remain on during Remote
Start
mode.
For security, power window operation is disabled when
the ve
hicle is in the Remote Start mode.
The engine can be started two consecutive times (two
15-min
ute cycles) with the key fob. However, the ignition
must be placed in the ON/RUN position before you can
repeat the start sequence for a third cycle.
To Exit Remote Start Mode Without Driving The
Vehicle
Push and release the Remote Start button one time or allow
the remote start cycle to complete the entire 15-minute cycle.
NOTE:
To avoid unintentional shutdowns, the system will disable
t
he one
time push of the Remote Start button for two seconds
after receiving a valid Remote Start request.
2
Loading ...
Loading ...
Loading ...