User Manual - Page 262

For 2019 Wrangler.

Loading ...
Loading ...
Loading ...
260 SAFETY
ALR — Switchable Automatic Locking Retractor
(Four-Door Models)
If the passenger seating position is equipped with an ALR
a
n
d is b
eing used for normal usage, only pull the seat belt
webbing out far enough to comfortably wrap around the
occupant’s mid-section so as to not activate the ALR. If the
ALR is activated, you will hear a clicking sound as the seat
belt retracts. Allow the webbing to retract completely in this
case and then carefully pull out only the amount of webbing
necessary to comfortably wrap around the occupant’s
mid-section. Slide the latch plate into the buckle until you
hear a "click."
In Automatic Locking Mode, the shoulder belt is automati-
cally pre-locked. The seat belt will still retract to remove any
slack in
the shoulder belt. Use the Automatic Locking Mode
anytime a child restraint is installed in a seating position that
has a seat belt with this feature. Children 12 years old and
under should always be properly restrained in the rear seat
of a vehicle with a rear seat.
How To Engage The Automatic Locking Mode
1. Buckle the combination lap and shoulder belt.
2. Grasp
the shoulder portion and pull downward until the
entire
seat belt is extracted.
WARNING!
Never place a rear-facing child restraint in front of an
air bag.
A deploying passenger front air bag can cause
death or serious injury to a child 12 years or younger,
including a child in a rear-facing child restraint.
Never install a rear-facing child restraint in the front
seat of
a vehicle. Only use a rear-facing child restraint
in the rear seat. If the vehicle does not have a rear seat,
do not transport a rear-facing child restraint in that
vehicle.
Loading ...
Loading ...
Loading ...