User Manual - Page 21

For 2019 Wrangler.

Loading ...
Loading ...
Loading ...
GETTING TO KNOW YOUR VEHICLE 19
The key fob allows you to lock or unlock the doors and swing
gate from distances up to approximately 66 ft (20 m) by
pressing
the appropriate button on the fob. The key fob does
not need to be pointed at the vehicle to activate the system.
NOTE:
With the ignition in ON/RUN position and with the vehicle
doors op
en, the lock button will be disabled, and only the
unlock button will be enabled. All RKE commands will be
disabled once the vehicle begins moving at 5
mph (8 km/h)
or above
.
Backup Mode Starting
In case the ignition switch does not change with the push of
a button
, the key fob may have a low or fully depleted
battery. A low key fob battery can be verified by referring to
the instrument cluster, which will display directions to
follow.
NOTE:
A low key fob battery condition may be indicated by a
message i
n the instrument cluster display, or by the LED
light on the key fob. If the LED key fob light no longer illu
-
minates from key fob button pushes, then the key fob battery
requires
replacement.
In this situation, a back up method can be used to operate the
ignition
switch. Put the nose side of the key fob against the
ENGINE START/STOP button, and push to operate the igni
-
tion switch.
Backup Starting Method
To Unlock The Doors And Swing Gate
Push and release the key fob unlock button once to unlock
the driv
er's door only, or twice to unlock all the doors and
swing gate. When the key fob unlock button is pushed, the
Illuminated Entry will initiate, and the turn signal lights will
flash twice.
2
Loading ...
Loading ...
Loading ...