Loading ...
Loading ...
Loading ...
336 STARTING AND OPERATING
Shifting Procedures
2H To 4H Auto Or 4H Auto To 2H
Shifting between 2H and 4H Auto can be made with the
vehicle
stopped or in motion. The preferred shifting speed
would be 0 to 45
mph (72 km/h). With the vehicle in motion,
the tra
nsfer case will engage/disengage faster if you
momentarily release the accelerator pedal after completing
the shift. Do not accelerate while shifting the transfer case.
Apply a constant force when shifting the transfer case lever.
2H/4H Auto To 4H Part Time Or 4H Part Time To 2H/4H
Auto
Shif
ting between 2H/4H AUTO to 4H PART TIME can be
made wit
h the vehicle stopped or in motion. The preferred
shifting speed would be 0 to 45
mph (72 km/h). With the
vehicle
in motion, the transfer case will engage/disengage
faster if you momentarily release the accelerator pedal after
completing the shift. Do not accelerate while shifting the
transfer case. Apply a constant force when shifting the
transfer case lever.
NOTE:
• D
o not attempt to make a shift while only the front or rear
wheels
are spinning. The front and rear driveshaft speeds
must be equal for the shift to take place. Shifting while
only the front or rear wheels are spinning can cause
damage to the transfer case.
• Delayed shifts out of four-wheel drive may be experienced
due to
uneven tire wear, low or uneven tire pressures,
excessive vehicle loading, or cold temperatures.
• Shifting effort will increase with speed, this is normal.
During
cold weather, you may experience increased effort in
shiftin
g until the transfer case fluid warms up. This is normal.
Loading ...
Loading ...
Loading ...