User Manual - Page 193

For 2019 Wrangler.

Loading ...
Loading ...
Loading ...
GETTING TO KNOW YOUR INSTRUMENT PANEL 191
2. Temperature Gauge
The temperature gauge shows engine coolant tempera-
ture.
Any reading within the normal range indicates
that th
e engine cooling system is operating satisfacto-
rily.
T
he gauge pointer will likely indicate a higher tempera-
ture wh
en driving in hot weather, up mountain grades,
or when
towing a trailer. It should not be allowed to
exceed the upper limits of the normal operating range.
3. Instrument Cluster Display
The in
strument cluster display features a driver-inter-
active
display. Refer to “Instrument Cluster Display” in
“Gettin
g To Know Your Instrument Panel” for further
information.
4. Fuel Gauge
The po
inter shows the level of fuel in the fuel tank
when th
e ignition switch is in the ON/RUN position.
The fuel pump symbol points to the side of the
vehicle where the fuel filler door is located.
5. S
peedometer
Indica
tes vehicle speed.
Premiu
m Instrument Cluster Descriptions
1. Tachometer
Indic
ates the engine speed in revolutions per minute
(RPM x
1000).
WARNING!
A hot engine cooling system is dangerous. You or others
could be
badly burned by steam or boiling coolant. You
may want to call an authorized dealer for service if your
vehicle overheats.
CAUTION!
Driving with a hot engine cooling system could damage
you
r vehic
le. If the temperature gauge reads H” pull
over and stop the vehicle. Idle the vehicle with the air
conditioner turned off until the pointer drops back into
the normal range. If the pointer remains on the “H”, turn
the engine off immediately and call an authorized dealer
for service.
CAUTION!
Do not operate the engine with the tachometer pointer in
the red
area. Engine damage will occur.
3
Loading ...
Loading ...
Loading ...