Loading ...
Loading ...
Loading ...
106 GETTING TO KNOW YOUR VEHICLE
(Continued)
3. Lift the frame upward, removing it from the vehicle.
Step Three
4. Store screws in a secure location.
5. Repea
t procedure on the front door frame (four door
models)
.
Door Frame Installation Four Door Models — If
Equipped
1. Install the front door rail first.
2. Carefully place the front door rail in the rubber seal at the
top of
the windshield, and line up the holes for the Torx
head screws (two for each door).
3. Swing the frame bracket around the side of the rail, and
insert
the screws from underneath. Tighten with #40 Torx
head dri
ver until they are snug, being careful not to
cross-thread the screws or overtighten. Refer to the table
below for the appropriate torque specifications for the
door rail screws.
WARNING!
• Do not drive your vehicle on public roads with the door
frame(s
) removed as you will lose the protection that
they can provide. This procedure is furnished for use
during off-road operation only.
• Do not drive your vehicle on public roads with the
doors removed as you will lose the protection that they
can provide. This procedure is furnished for use during
off-road operation only.
WARNING! (Continued)
Loading ...
Loading ...
Loading ...