Loading ...
Loading ...
Loading ...
STARTING AND OPERATING 333
4H To 4L Or 4L To 4H
With the vehicle rolling at 2 to 3 mph (3 to 5 km/h), shift an
automati
c transmission into NEUTRAL (N), or press the
clutch pedal on a manual transmission. While the vehicle is
coasting at 2 to 3
mph (3 to 5 km/h), shift the transfer case
lever fi
rmly to the desired position. Do not pause with the
transfer case in N (Neutral). Once the shift is completed,
place the automatic transmission into DRIVE or release the
clutch pedal on a manual transmission.
NOTE:
Shifting into or out of 4L is possible with the vehicle
complete
ly stopped; however, difficulty may occur due to
the mating teeth not being properly aligned. Several
attempts may be required for clutch teeth alignment and
shift completion to occur. The preferred method is with the
vehicle rolling at 2 to 3
mph (3 to 5 km/h). Avoid attempting
to engage
or disengage 4L with the vehicle moving faster
than 2 to 3
mph (3 to 5 km/h).
Five-Position Transfer Case
Four-Wheel Drive Gear Selector
The transfer case provides five mode positions:
• 2H (Two-Wheel Drive High Range)
• 4H Auto
(Four-Wheel Drive Auto High Range)
• 4H PT (
Four-Wheel Drive Part Time High Range)
• N (Neut
ral)
• 4L (Four
-Wheel Drive Low Range)
WARNING!
Failure to engage a transfer case position completely can
cause tr
ansfer case damage or loss of power and vehicle
control. You could have a collision. Do not drive the
vehicle unless the transfer case is fully engaged.
5
Loading ...
Loading ...
Loading ...