User Manual - Page 549

For 2019 Wrangler.

Loading ...
Loading ...
Loading ...
MULTIMEDIA 547
NOTE:
The “ParkView Backup Camera Delay” setting determines whether or not the screen displays the rear view image with
dynamic
grid lines for up to ten seconds after the vehicle is shifted out of REVERSE. This delay is canceled if the vehicle’s
speed exceeds 8
mph (13 km/h), the transmission is shifted into PARK, or the ignition is switched to the OFF position.
ParkView Backup Camera
Active G
uide Lines
On Off
NOTE:
The “ParkView Backup Camera Active Guide Lines” setting overlays the Rear Backup Camera image with active, or
d
ynamic,
grid lines to help illustrate the width of the vehicle and its project back up path, based on the steering wheel posi-
tion when the option is checked. A dashed center line overlay indicates the center of the vehicle to assist with parking or
a
ligning
to a hitch/receiver.
ParkSense — If Equipped Sound Only Sound & Display
Rear ParkSense Volume — If
Equippe
d
Low Medium High
Blind Spot Alert — If
Equippe
d
Off Lights Lights & Chime
NOTE:
If your vehicle has experienced any damage in the area where the sensor is located, even if the fascia is not damaged, the
s
ensor
may have become misaligned. Take your vehicle to an authorized dealer to verify sensor alignment. A sensor that is
misaligned results in the Blind Spot Monitor (BSM) not operating to specification.
Hill Start Assist On Off
Setting Name Selectable Options
9
Loading ...
Loading ...
Loading ...